With enhanced software and included series CAN bus adapter, this specially designed wireless unit can control operation of either single or a group of window rollers. The control unit is 230VAC mains supplied and equipped with two power relay outputs and terminals for connecting roller 230VAC electric motor, wall switch and the CAN bus twisted wire. There are also D/N terminals for external clock input controlling closing and opening rollers at preset times. The unit can be operated by wired wall switch or any Elmes made remote control transmitter. When controlled by remotes, it may be set for operation with the use of one or two transmitter's buttons. When chosen as master control unit with group control function set on, it can sequentially (with 0,5s intervals) close or open a group of up to 42 rollers operated by the same type control units connected to the CAN bus. With the Elmes CH32HT multi-channel transmitter learned to the master unit, up to 30 window rollers can be wireless controlled individually with two control channels of the transmitter reserved for opening and closing control of the entire group of rollers. The control unit device features highly sensitive super heterodyne receiver and withstands wide range of operating temperatures.

SPECIFICATION:
EU standards compliant 433,92MHz super heterodyne receiver;
12 hand transmitters memory;
controller power supply 230VAC, 2VA (roller motor off);
power relay control outputs, 2 x NO, max 16A/250VAC;
maximal number of controllers connected to the CAN bus: 64;
maximal number of controllers in one group: 42;
sequential starting of roller motors in 0.5 second intervals;
programmed motor output time lapse from 1s to 4 min, equal for opening and closing rotation;
operating temperature from -20 to +40ºC;
controller external dimensions (l/w/h) 87/87/39mm.