The controller is designed to operate with a single 24VDC (STB24VM1) or 12VDC (STB12VM1) motor used to power some types of moving gates. Change of the gate movement direction is obtained by the change of the voltage polarity supplied to the motor. Below listed are standard functions and features of the Elmes STB... controller:
dynamic code KEELOQ® technology;
superheterodyne type receiver;
wireless control with the use of all 433,92MHz band Elmes made hand transmitters or wall type switch in "open-stop-close-stop-open ..." mode;
up to 112 hand transmitters memory capacity as standard;
motor rotation slowing down function at gate's movement end protecting against mechanical disorders and ensuring long and reliable operation life time;
short pulse opening function allowing clearing off mechanical tension after gate close;
overload protection separately adjusted for opening and closing movements;
automatic gate close function after programmed PAUSE time;
possibility of automatic gate close function exclusion by hand transmitter command;
parking mode operation - the use of hand transmitters opens the gate without stopping or closing commands;
inputs for end-of-line NO or NC type switches;
courtesy lamp or gate movement warning lamp (flashing) control output;
input for photo/infrared NC type protection cell with the cell object detection generating:
at gate close - instant opening movement;
at pause time - halting pause time count;
when the object clears while in pause, the pause time is counted from start again or pause time is shorter by five seconds;
set of additional features allowing better gate operation security: STOP input for connecting additional protection devices; automatic gate close signalled by three seconds warning lamp flashing prior to gate movement; programmable operation time of the DC motor as protection against end of line switch failure to operate properly.


SPECIFICATION
433,92MHz band super heterodyne receiver;
112 hand transmitters memory capacity;
controller power supply 24VAC (STB24VM1) or 12VAC (STB12VM1) with 100mA current draw at standby;
maximal DC motor current draw 6,3 Ampere;
courtesy/warning lamp maximal power 40W;
photo/infrared cell supply output: 24VDC (STB24VM1) or 12VDC (STB12VM1) /240mA max;
overload protection sensing current draw range 2 ... 7,5 Ampere;
programmable operation time of DC motor in range of 1s up to 60 minutes;
programmable PAUSE time or lamp on time in range of 1 to 255 seconds;
operation temperature range: -20 do +40ºC.