Salīdzināt
Pasūtīt
Katalogs

Dūmu Barjēras

FLR100 ~ Optiska dūmu staru barjēra 100m IP55 11-27Vdc

FLR100 ~ Optiska dūmu staru barjēra 100m IP55 11-27Vdc

Kods: 006183
Pieejams:
Cena: 267.80EUR

Sūtīt uz e-pastu

Ievadiet e-pastu:

Barošanas avots

10.8 – 26.8 Vdc

Darbības attālums

100m

Aizsardzība

IP55

Model FLR100
Power Supply Voltage 10.8 – 26.8 Vdc
Consumption in Idle @ 24 Vdc (Tx, Rx, Tx/Rx) 55 mA, 45 mA, 55 mA
Consumption in Idle @ 12 Vdc (Tx, Rx, Tx/Rx) 45 mA, 35 mA, 45 mA
Consumption in Alarm @ 24 Vdc (Rx, Tx/Rx) 50 mA, 60 mA
Consumption in Alarm @ 12 Vdc (Rx, Tx/Rx) 40 mA, 50 mA
Consumption in Fault @ 24 Vdc (Rx, Tx/Rx) 35 mA, 45 mA
Consumption in Fault @ 12 Vdc (Rx, Tx/Rx) 30 mA, 40 mA
Pre-Alarm Obscuration Thresholds 20%, 25%, 30%, 35%
Alarm Obscuration Threshold 35%
Minimum Operating Distance 5 m
Maximum Operating Distance 150 m (separate Tx and Rx) / 100 m (Tx/Rx and passive reflector)
Wavelenght of the Transmitter Beam 890 nm
Tolerance to the Beam Misalignment (separate Tx and Rx) ± 1°
Tolerance to the Beam Misalignment (TxRx unit and passive reflector) ± 0.5° ; ± 5°
Pre-Alarm Relay 1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper
Alarm Relay 1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper
Fault Relay 1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper
Conventional Detection Circuit – Input Voltage Range 10 – 20 Vdc
Conventional Detection Circuit – Consumption in Pre-Alarm Condition 20 mA @ 20 Vdc
Conventional Detection Circuit – Consumption in Alarm Condition 40 mA @ 20 Vdc
Conventional Detection Circuit – Reset Pulse Duration 200 ms
Operating Temperature From -10°C - 55°C
Relative Humidity 95%
Protection Grade IP55
Passive Reflector Dimensions 10 x 10 cm / 20 x 20 cm / 30 x 20 cm
Dimensions 248 x 122 x 120 mm
Weight 900 g